Macap
MXD Xtreme Chrome
MXD Xtreme Chrome
MXD Xtreme is an on-demand coffee grinder from Macap with a digital timer for perfect dosing of freshly ground coffee every time. MXD Xtreme has two grinding time programs, single/double, which can be adjusted with high precision using the steplessly adjustable grind setting. You can easily reprogram the times. MXD Xtreme is the latest model in the series of on-demand coffee grinders from Macap. It is equipped with titanium-coated burrs that provide short grinding times and a longer lifespan for the burrs.
MXD Xtreme has a large bean hopper, with room for 1400 g of espresso beans, which means you can grind coffee for approximately 120 espressos per filled coffee grinder. The coffee grinder's stylish and classic design makes the MXD Xtreme look very good alongside a professional espresso machine, as the shape and design match and complement each other.
The bean inlet on the MXD Xtreme is adjusted with a flat tray that can easily be pulled away from or pushed against the grinder. If you want to remove the bean hopper from the MXD Xtreme but there are still espresso beans left inside, you can push the flat tray in so that it covers the entire opening and then twist the bean hopper upwards. This is particularly useful if you want to clean the grinder or suspect that a problem has occurred in the grinding mechanism. To clean the MXD Xtreme, the bean hopper should be removed and a dose of Pulygrind should be poured into the grinding mechanism. After that, the bean hopper is placed back in position. Grind out the Pulygrind crystals together with coffee until no crystals come out of the grinding mechanism; a couple of doses usually suffice.
The coffee grinder's grind setting can be adjusted steplessly using a knob. If you wish to make an adjustment, turn the knob a little at a time. If the MXD Xtreme coffee grinder is reasonably well set, usually only a small change is needed. To check when the coffee grinder is correctly set, you can grind coffee for an espresso and then brew it. Keep trying until the espresso is brewed at the right pace in the right time.
The difference between the Macap MXD and the Macap MXD Xtreme is the burrs. The MXD has steel burrs while the MXD Xtreme has titanium-coated burrs. This difference affects the grinding time. The MXD grinds a double dose in 6 seconds while the MXD Xtreme grinds in 4 seconds. The titanium burrs also have a longer lifespan.
What primarily distinguishes Macap's coffee grinders is their production capacity. The M4D is suitable for a smaller restaurant or a small café. The MXD is just right for a normal café. The M7D is the grinder that can handle all the requirements of a café with many guests.
MXD Xtreme has a large bean hopper, with room for 1400 g of espresso beans, which means you can grind coffee for approximately 120 espressos per filled coffee grinder. The coffee grinder's stylish and classic design makes the MXD Xtreme look very good alongside a professional espresso machine, as the shape and design match and complement each other.
The bean inlet on the MXD Xtreme is adjusted with a flat tray that can easily be pulled away from or pushed against the grinder. If you want to remove the bean hopper from the MXD Xtreme but there are still espresso beans left inside, you can push the flat tray in so that it covers the entire opening and then twist the bean hopper upwards. This is particularly useful if you want to clean the grinder or suspect that a problem has occurred in the grinding mechanism. To clean the MXD Xtreme, the bean hopper should be removed and a dose of Pulygrind should be poured into the grinding mechanism. After that, the bean hopper is placed back in position. Grind out the Pulygrind crystals together with coffee until no crystals come out of the grinding mechanism; a couple of doses usually suffice.
The coffee grinder's grind setting can be adjusted steplessly using a knob. If you wish to make an adjustment, turn the knob a little at a time. If the MXD Xtreme coffee grinder is reasonably well set, usually only a small change is needed. To check when the coffee grinder is correctly set, you can grind coffee for an espresso and then brew it. Keep trying until the espresso is brewed at the right pace in the right time.
The difference between the Macap MXD and the Macap MXD Xtreme is the burrs. The MXD has steel burrs while the MXD Xtreme has titanium-coated burrs. This difference affects the grinding time. The MXD grinds a double dose in 6 seconds while the MXD Xtreme grinds in 4 seconds. The titanium burrs also have a longer lifespan.
What primarily distinguishes Macap's coffee grinders is their production capacity. The M4D is suitable for a smaller restaurant or a small café. The MXD is just right for a normal café. The M7D is the grinder that can handle all the requirements of a café with many guests.

Specifications
| Artikelnummer | AMXDXR235C83 |
| Varumärke | MACAP |
| Höjd mm | 600 |
| Bredd mm | 230 |
| Djup mm | 370 |
| Elanslutning | 230V 10A |
| Bönhållare gram | 1400 |
| Färg | Chromium |
| Originalartikelnummer | AMXDXRW383 |
Spare parts
Inga reservdelar matchar sökningen.
-
Microswitch
Regular price 170 krSale price 170 kr Regular price -
Switch with LED
Regular price 119 krSale price 119 kr Regular price -
Automatic stop, full
Regular price 309 krSale price 309 kr Regular price -
Blindsil 58 mm
Regular price 120 krSale price 120 kr Regular price -
Rubber body holder
Regular price 130 krSale price 130 kr Regular price -
Feather MXD M7D
Regular price 63 krSale price 63 kr Regular price -
Rubber support MXD M7D
Regular price 160 krSale price 160 kr Regular price -
Programming Tool MXD M7D
Regular price 870 krSale price 870 kr Regular price -
Display MXD
Regular price 2 300 krSale price 2 300 kr Regular price -
Display M7D
Regular price 1 860 krSale price 1 860 kr Regular price -
Electronics board MXD M7D
Regular price 2 390 krSale price 2 390 kr Regular price -
Filter Holder Support MXD/M7D/M42D
Regular price 770 krSale price 770 kr Regular price -
Coffee press MXD/M7D/M42D
Regular price 1 420 krSale price 1 420 kr Regular price -
Handlebar start button MXD M7D
Regular price 125 krSale price 125 kr Regular price -
Holder support rod MXD M7D
Regular price 240 krSale price 240 kr Regular price -
Zama Digital Support
Regular price 720 krSale price 720 kr Regular price -
Setting ring stepless M7D
Regular price 160 krSale price 160 kr Regular price -
Adjustment ring stepless MXD
Regular price 150 krSale price 150 kr Regular price -
Air intake
Regular price 140 krSale price 140 kr Regular price -
Lock bönhållare MX M7 MC6 MC7
Regular price 360 krSale price 360 kr Regular price -
Bean holder MX-M7-MC6-MC7
Regular price 710 krSale price 710 kr Regular price -
Foot MXD, M7D
Regular price 82 krSale price 82 kr Regular price -
Electronics board MXD Xtreme, M4D M5D
Regular price 1 470 krSale price 1 470 kr Regular price -
Capacitor 20mF MXD Xtreme
Regular price 480 krSale price 480 kr Regular price -
Capacitor 30µF M7D
Regular price 200 krSale price 200 kr Regular price -
Capacitor 25mF
Regular price 450 krSale price 450 kr Regular price -
Microswitch
Regular price 295 krSale price 295 kr Regular price -
Grinding discs MXD Xtreme 74 mm
Regular price 4 090 krSale price 4 090 kr Regular price -
New fork for old MXD
Regular price 860 krSale price 860 kr Regular price -
Adjustment knob M42
Regular price 120 krSale price 120 kr Regular price -
Silvia on/off switch
Regular price 156 krSale price 156 kr Regular price
-
Microswitch
Regular price 170 krSale price 170 kr Regular price -
Switch with LED
Regular price 119 krSale price 119 kr Regular price -
Automatic stop, full
Regular price 309 krSale price 309 kr Regular price -
Blindsil 58 mm
Regular price 120 krSale price 120 kr Regular price -
Rubber body holder
Regular price 130 krSale price 130 kr Regular price -
Feather MXD M7D
Regular price 63 krSale price 63 kr Regular price -
Rubber support MXD M7D
Regular price 160 krSale price 160 kr Regular price -
Programming Tool MXD M7D
Regular price 870 krSale price 870 kr Regular price -
Display MXD
Regular price 2 300 krSale price 2 300 kr Regular price -
Display M7D
Regular price 1 860 krSale price 1 860 kr Regular price -
Electronics board MXD M7D
Regular price 2 390 krSale price 2 390 kr Regular price -
Filter Holder Support MXD/M7D/M42D
Regular price 770 krSale price 770 kr Regular price -
Coffee press MXD/M7D/M42D
Regular price 1 420 krSale price 1 420 kr Regular price -
Handlebar start button MXD M7D
Regular price 125 krSale price 125 kr Regular price -
Holder support rod MXD M7D
Regular price 240 krSale price 240 kr Regular price -
Zama Digital Support
Regular price 720 krSale price 720 kr Regular price -
Setting ring stepless M7D
Regular price 160 krSale price 160 kr Regular price -
Adjustment ring stepless MXD
Regular price 150 krSale price 150 kr Regular price -
Air intake
Regular price 140 krSale price 140 kr Regular price -
Lock bönhållare MX M7 MC6 MC7
Regular price 360 krSale price 360 kr Regular price -
Bean holder MX-M7-MC6-MC7
Regular price 710 krSale price 710 kr Regular price -
Foot MXD, M7D
Regular price 82 krSale price 82 kr Regular price -
Electronics board MXD Xtreme, M4D M5D
Regular price 1 470 krSale price 1 470 kr Regular price -
Capacitor 20mF MXD Xtreme
Regular price 480 krSale price 480 kr Regular price -
Capacitor 30µF M7D
Regular price 200 krSale price 200 kr Regular price -
Capacitor 25mF
Regular price 450 krSale price 450 kr Regular price -
Microswitch
Regular price 295 krSale price 295 kr Regular price -
Grinding discs MXD Xtreme 74 mm
Regular price 4 090 krSale price 4 090 kr Regular price -
New fork for old MXD
Regular price 860 krSale price 860 kr Regular price -
Adjustment knob M42
Regular price 120 krSale price 120 kr Regular price -
Silvia on/off switch
Regular price 156 krSale price 156 kr Regular price